Dane County Soil Descriptions

Click on the soil code to view its description

AsB

AsC2

BaB2

Ad - Adrian muck

Very poorly drained organic over sandy soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 4W where the wetness limitation is removed.

Af - Alluvial land, wet

Poorly drained.
Frequently ponded.
Frequently flooded.
This component is hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness and

AsB - Ashdale silt loam, 2 to 6 percent slopes

Well drained silty soil.
Hard bedrock is at a depth of 40 to 60 inches.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

AsC2 - Ashdale silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
Hard bedrock is at a depth of 40 to 60 inches.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 2E.

BaB2 - Basco silt loam, 2 to 6 percent slopes, eroded

Well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 2E.

BaC2 - Basco silt loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

BaD2 - Basco silt loam, 12 to 20 percent slopes, eroded

Well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

BaE2 - Basco silt loam, 20 to 30 percent slopes, eroded

Well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

BbA - Batavia silt loam, gravelly substratum, 0 to 2 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

BbB - Batavia silt loam, gravelly substratum, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

BbC2 - Batavia silt loam, gravelly substratum, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

BoB - Boyer sandy loam, 2 to 6 percent slopes

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 3S.

BoC2 - Boyer sandy loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

BoD2 - Boyer sandy loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

BrA - Brems loamy sand

Moderately well drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 4S.

ChB - Chaseburg silt loam, 2 to 6 percent slopes

Well drained silty soil.
Occasionally flooded.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.
The subclass is 2E where the flooding limitation is removed.

Co - Colwood silt loam

Poorly drained loamy soil.
Frequently ponded.
High available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 2W where the wetness limitation is removed.

Cu - Cut and fill land

Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 7S.

DeA - Dells silt loam, 0 to 3 percent slopes

Somewhat poorly drained silty over sandy soil.
Rarely flooded.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2W.

DfA - Del Rey silt loam, 0 to 3 percent slopes

Somewhat poorly drained clayey soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

DgB2 - Derinda silt loam, 2 to 6 percent slopes, eroded

Well and moderately well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

DgC2 - Derinda silt loam, 6 to 12 percent slopes, eroded

Well and moderately well drained clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

DmA - Dickinson loamy fine sand, sandy variant, 1 to 4 percent slopes

Excessively drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 4S.
The subclass is 2E where irrigated.

DnB - Dodge silt loam, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

DnC2 - Dodge silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

DoC2 - Dodge and Kidder soils, 6 to 20 percent slopes, eroded

High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 4E.

DpB - Dodgeville silt loam, 2 to 6 percent slopes

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

DpC - Dodgeville silt loam, 6 to 12 percent slopes

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

DpD2 - Dodgeville silt loam, 12 to 20 percent slopes, eroded

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

DrD2 - Dresden loam, 12 to 20 percent slopes, eroded

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

DrE2 - Dresden loam, 20 to 30 percent slopes, eroded

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

DsB - Dresden silt loam, 2 to 6 percent slopes

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

DsC2 - Dresden silt loam, 6 to 12 percent slopes, eroded

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

DuB2 - Dunbarton silt loam, 2 to 6 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 3E.

DuC2 - Dunbarton silt loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

DuD2 - Dunbarton silt loam, 12 to 20 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

DuE2 - Dunbarton silt loam, 20 to 30 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7E.

EdB2 - Edmund silt loam, 2 to 6 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

EdC2 - Edmund silt loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

EdD2 - Edmund silt loam, 12 to 20 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 12 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

EfB - Elburn silt loam, 1 to 4 percent slopes

Somewhat poorly drained silty soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

EgA - Elburn silt loam, gravelly substratum, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

EhC2 - Eleva sandy loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

EhD2 - Eleva sandy loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

EhE2 - Eleva sandy loam, 20 to 30 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

EmC2 - Elkmound sandy loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Hard bedrock is at a depth of 10 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 ton/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

EmD2 - Elkmound sandy loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Hard bedrock is at a depth of 10 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 ton/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

EmE2 - Elkmound sandy loam, 20 to 30 percent slopes, eroded

Well drained loamy soil.
Hard bedrock is at a depth of 10 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 ton/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7E.

EmF - Elkmound sandy loam, 30 to 60 percent slopes

Well drained loamy soil.
Hard bedrock is at a depth of 10 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 ton/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7E.

Ev - Elvers silt loam

Poorly and very poorly drained silty soil.
Frequently ponded.
Frequently flooded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained and protected from flooding.
The land capability subclass is 6W.
The subclass is 2W where the wetness and flooding limitations are removed.

GaB - Gale silt loam, 2 to 6 percent slopes

Well drained silty over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate availablewater capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

GaC2 - Gale silt loam, 6 to 12 percent slopes, eroded

Well drained silty over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

GaD2 - Gale silt loam, 12 to 20 percent slopes, eroded

Well drained silty over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

Gn - Granby loamy sand

Poorly and very poorly drained sandy soil.
Frequently ponded.
Low available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 5W.
The subclass is 4W where the wetness limitation is removed.

GsA - Grays silt loam, 0 to 2 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

GsB - Grays silt loam, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

GsC2 - Grays silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 3E.

GwB - Griswold loam, 2 to 6 percent slopes

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

GwC - Griswold loam, 6 to 12 percent slopes

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 3E.

GwD2 - Griswold loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

HaA - Hayfield silt loam, 0 to 3 percent slopes

loamy over sandy soil.

Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

HbB - Hixton loam, 2 to 6 percent slopes

Well drained loamy over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

HbC2 - Hixton loam, 6 to 12 percent slopes, eroded

Well drained loamy over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

HbD2 - Hixton loam, 12 to 20 percent slopes, eroded

Well drained loamy over sandy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

Ho - Houghton muck

Very poorly drained organic soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

HuA - Huntsville silt loam, 0 to 2 percent slopes

Well drained silty soil.
Occasionally flooded.
Very high available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2W.
The capability class is 1 where the flooding limitation is removed.

HuB - Huntsville silt loam, 2 to 6 percent slopes

Well drained silty soil.
Occasionally flooded.
Very high available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2W.
The subclass is 2E where the flooding limitation is removed.

KcB - Kickapoo fine sandy loam, 2 to 6 percent slopes

Well drained loamy soil.
Frequently flooded.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5tons/acre/year.
Not highly erodible.
Prime farmland where protected from flooding.
The land capability subclass is 3W.
The subclass is 2E where the flooding limitation is removed.

KdB - Kidder loam, 2 to 6 percent slopes

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

KdC2 - Kidder loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

KdD2 - Kidder loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

KeA - Kegonsa silt loam, 0 to 2 percent slopes

Well drained silty over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

KeB - Kegonsa silt loam, 2 to 6 percent slopes

Well drained silty over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

KrD2 - Kidder soils, 10 to 20 percent slopes, eroded

This map unit contains 2 main components:

Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 4E.

KrE2 - Kidder soils, 20 to 35 percent slopes, eroded

This map unit contains 2 main components:

Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 6E.

Ma - Made land

Well drained.
Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 8S.

Mb - Marsh

Very poorly drained.
Frequently ponded.
Frequently flooded.
This component is hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 8W.
The subclass is 4W where the wetness and

Mc - Marshan silt loam

Very poorly drained loamy over sandy soil.
Frequently ponded.
Rarely flooded.
Moderate available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

MdB - McHenry silt loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

MdC2 - McHenry silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

MdD2 - McHenry silt loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

MeA - Meridian loam, 0 to 2 percent slopes

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

MeB - Meridian loam, 2 to 6 percent slopes

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

MhC2 - Military loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

MhD2 - Military loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

MhE2 - Military loam, 20 to 30 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

MoA - Montgomery silty clay loam, 0 to 3 percent slopes

Very poorly drained clayey soil.
Frequently ponded.
High available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 5W.
The subclass is 3W where the wetness limitation is removed.

NeB2 - NewGlarus silt loam, 2 to 6 percent slopes, eroded

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

NeC2 - NewGlarus silt loam, 6 to 12 percent slopes, eroded

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

NeD2 - NewGlarus silt loam, 12 to 20 percent slopes, eroded

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

NeE2 - NewGlarus silt loam, 20 to 30 percent slopes, eroded

Well drained silty over clayey soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

Or - Orion silt loam

Somewhat poorly drained silty soil.
Frequently flooded.
Very high available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where protected from flooding.
The land capability subclass is 3W.
The capability class is 1 where the flooding limitation is removed.

Os - Orion silt loam, wet

Poorly drained silty soil.
Frequently ponded.
Frequently flooded.
High available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained and protected from flooding.
The land capability subclass is 4W.
The subclass is 2W where the wetness and flooding limitations are removed.

Ot - Otter silt loam

Poorly drained silty soil.
Frequently ponded.
Frequently flooded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained and protected from flooding.
The land capability subclass is 5W.
The subclass is 2W where the wetness and flooding limitations are removed.

Pa - Palms muck

Very poorly drained organic over loamy soil.
Frequently ponded.
Very high available water capacity.
Thissoil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

PeB - Pecatonica silt loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

PeC2 - Pecatonica silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

PfB - Plainfield sand, 1 to 6 percent slopes

Excessively drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 4S.
The subclass is 3E where irrigated.

PnA - Plano silt loam, 0 to 2 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

PnB - Plano silt loam, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

PnC2 - Plano silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 3E.

PoA - Plano silt loam, gravelly substratum, 0 to 2 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

PoB - Plano silt loam, gravelly substratum, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

PoC2 - Plano silt loam, gravelly substratum, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

PrB - Port Byron silt loam, 2 to 6 percent slopes

Moderately well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

PrC - Port Byron silt loam, 6 to 12 percent slopes

Moderately well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 3E.

RaA - Radford silt loam, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
Frequently flooded.
Very high available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained and protected from flooding.
The land capability subclass is 3W.
The capability class is 1 where the flooding limitation is removed.

RnB - Ringwood silt loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

RnC2 - Ringwood silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

RoB - Rockton silt loam, 2 to 6 percent slopes

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

RoC2 - Rockton silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

RoD2 - Rockton silt loam, 12 to 30 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

RpE - Rodman sandy loam, 12 to 35 percent slopes

Excessively drained sandy soil.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7S.

SaA - Sable silty clay loam, 0 to 3 percent slopes

Poorly drained silty soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 2W where the wetness limitation is removed.

ScA - St. Charles silt loam, 0 to 2 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

ScB - St. Charles silt loam, 2 to 6 percent slopes

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

ScC2 - St. Charles silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

ScD2 - St. Charles silt loam, 12 to 20 percent slopes, eroded

Well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

SeB - Salter sandy loam, 2 to 6 percent slopes

Moderately well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

SeC2 - Salter sandy loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

SfA - Salter silt loam, 0 to 2 percent slopes

Moderately well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

SfB2 - Salter silt loam, 2 to 6 percent slopes, eroded

Moderately well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

ShA - Salter sandy loam, wet variant, 0 to 3 percent slopes

Somewhat poorly drained loamy soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

SmB - Seaton silt loam, 2 to 6 percent slopes

Well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

SmC2 - Seaton silt loam, 6 to 12 percent slopes, eroded

Well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

SmD2 - Seaton silt loam, 12 to 20 percent slopes, eroded

Well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

SmE2 - Seaton silt loam, 20 to 30 percent slopes, eroded

Well drained silty soil.
Very high available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

SnC2 - Seaton fine sandy loam, loamy variant, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

SnD2 - Seaton fine sandy loam, loamy variant, 12 to 20 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

SnE - Seaton fine sandy loam, loamy variant, 20 to 30 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

SoD - Sogn silt loam, 2 to 20 percent slopes

Somewhat excessively drained loamy soil.
Hard bedrock is at a depth of 4 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 7S.

SoE - Sogn silt loam, 20 to 35 percent slopes

Somewhat excessively drained loamy soil.
Hard bedrock is at a depth of 4 to 20 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7S.

SpB - Spinks and Plainfield loamy sands, 2 to 6 percent slopes

This map unit contains 2 main components:

Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 4S.

SpC - Spinks and Plainfield loamy sands, 6 to 12 percent slopes

Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 4S.

SpD - Spinks and Plainfield loamy sands, 12 to 25 percent slopes

Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not prime farmland.
The land capability subclass is 7E.

St - Stony and rocky land

Somewhat excessively drained.
Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 7E.
The subclass is 7E where the surface stones limitation is removed.

TrB - Troxel silt loam, 1 to 3 percent slopes

Moderately well drained silty soil.
Very high available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

VrB - Virgil silt loam, 1 to 4 percent slopes

Somewhat poorly drained silty soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2W.

VwA - Virgil silt loam, gravelly substratum, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
High available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2W.
Not highly erodible.
Not prime farmland.
Not assigned a land capability class.

Wa - Wacousta silty clay loam

Very poorly drained silty soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 3W where the wetness limitation is removed.

WrB - Warsaw silt loam, 2 to 6 percent slopes

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

WrC2 - Warsaw silt loam, 6 to 12 percent slopes, eroded

Well drained loamy over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

Wt - Watseka loamy sand

Somewhat poorly drained sandy soil.
Low available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 3S.

WvB - Westville silt loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

WvC2 - Westville silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowableerosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is3E.

WvD2 - Westville silt loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

WwE2 - Whalan loam, 20 to 30 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7E.

WxB - Whalan silt loam, 2 to 6 percent slopes

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2E.

WxC2 - Whalan silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 3E.

WxD2 - Whalan silt loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

Dane County Soil Descriptions

Click on the soil code to view its description

Ad - Adrian muck

Af - Alluvial land, wet

AsB - Ashdale silt loam, 2 to 6 percent slopes

AsC2 - Ashdale silt loam, 6 to 12 percent slopes, eroded

BaB2 - Basco silt loam, 2 to 6 percent slopes, eroded

BaC2 - Basco silt loam, 6 to 12 percent slopes, eroded

BaD2 - Basco silt loam, 12 to 20 percent slopes, eroded

BaE2 - Basco silt loam, 20 to 30 percent slopes, eroded

BbA - Batavia silt loam, gravelly substratum, 0 to 2 percent slopes

BbB - Batavia silt loam, gravelly substratum, 2 to 6 percent slopes

BbC2 - Batavia silt loam, gravelly substratum, 6 to 12 percent slopes, eroded

BoB - Boyer sandy loam, 2 to 6 percent slopes

BoC2 - Boyer sandy loam, 6 to 12 percent slopes, eroded

BoD2 - Boyer sandy loam, 12 to 20 percent slopes, eroded

BrA - Brems loamy sand

ChB - Chaseburg silt loam, 2 to 6 percent slopes

Co - Colwood silt loam

Cu - Cut and fill land

DeA - Dells silt loam, 0 to 3 percent slopes

DfA - Del Rey silt loam, 0 to 3 percent slopes

DgB2 - Derinda silt loam, 2 to 6 percent slopes, eroded

DgC2 - Derinda silt loam, 6 to 12 percent slopes, eroded

DkA - Dickinson sandy loam, 0 to 2 percent slopes

DkB - Dickinson sandy loam, 2 to 6 percent slopes

DkC - Dickinson sandy loam, 6 to 12 percent slopes

DmA - Dickinson loamy fine sand, sandy variant, 1 to 4 percent slopes

DnB - Dodge silt loam, 2 to 6 percent slopes

DnC2 - Dodge silt loam, 6 to 12 percent slopes, eroded

DoC2 - Dodge and Kidder soils, 6 to 20 percent slopes, eroded

DpB - Dodgeville silt loam, 2 to 6 percent slopes

DpC - Dodgeville silt loam, 6 to 12 percent slopes

DpD2 - Dodgeville silt loam, 12 to 20 percent slopes, eroded

DrD2 - Dresden loam, 12 to 20 percent slopes, eroded

DrE2 - Dresden loam, 20 to 30 percent slopes, eroded

DsB - Dresden silt loam, 2 to 6 percent slopes

DsC2 - Dresden silt loam, 6 to 12 percent slopes, eroded

DuB2 - Dunbarton silt loam, 2 to 6 percent slopes, eroded

DuC2 - Dunbarton silt loam, 6 to 12 percent slopes, eroded

DuD2 - Dunbarton silt loam, 12 to 20 percent slopes, eroded

DuE2 - Dunbarton silt loam, 20 to 30 percent slopes, eroded

EdB2 - Edmund silt loam, 2 to 6 percent slopes, eroded

EdC2 - Edmund silt loam, 6 to 12 percent slopes, eroded

EdD2 - Edmund silt loam, 12 to 20 percent slopes, eroded

EfB - Elburn silt loam, 1 to 4 percent slopes

EgA - Elburn silt loam, gravelly substratum, 0 to 3 percent slopes

EhC2 - Eleva sandy loam, 6 to 12 percent slopes, eroded

EhD2 - Eleva sandy loam, 12 to 20 percent slopes, eroded

EhE2 - Eleva sandy loam, 20 to 30 percent slopes, eroded

EmC2 - Elkmound sandy loam, 6 to 12 percent slopes, eroded

EmD2 - Elkmound sandy loam, 12 to 20 percent slopes, eroded

EmE2 - Elkmound sandy loam, 20 to 30 percent slopes, eroded

EmF - Elkmound sandy loam, 30 to 60 percent slopes

Ev - Elvers silt loam

GaB - Gale silt loam, 2 to 6 percent slopes

GaC2 - Gale silt loam, 6 to 12 percent slopes, eroded

GaD2 - Gale silt loam, 12 to 20 percent slopes, eroded

Gn - Granby loamy sand

GsA - Grays silt loam, 0 to 2 percent slopes

GsB - Grays silt loam, 2 to 6 percent slopes

GsC2 - Grays silt loam, 6 to 12 percent slopes, eroded

GwB - Griswold loam, 2 to 6 percent slopes

GwC - Griswold loam, 6 to 12 percent slopes

GwD2 - Griswold loam, 12 to 20 percent slopes, eroded

HaA - Hayfield silt loam, 0 to 3 percent slopes

HbB - Hixton loam, 2 to 6 percent slopes

HbC2 - Hixton loam, 6 to 12 percent slopes, eroded

HbD2 - Hixton loam, 12 to 20 percent slopes, eroded

Ho - Houghton muck

HuA - Huntsville silt loam, 0 to 2 percent slopes

HuB - Huntsville silt loam, 2 to 6 percent slopes

KcB - Kickapoo fine sandy loam, 2 to 6 percent slopes

KdB - Kidder loam, 2 to 6 percent slopes

KdC2 - Kidder loam, 6 to 12 percent slopes, eroded

KdD2 - Kidder loam, 12 to 20 percent slopes, eroded

KeA - Kegonsa silt loam, 0 to 2 percent slopes

KeB - Kegonsa silt loam, 2 to 6 percent slopes

KrD2 - Kidder soils, 10 to 20 percent slopes, eroded

KrE2 - Kidder soils, 20 to 35 percent slopes, eroded