Iron County Soil Descriptions

Parent material: herbaceous organic material 16 to 51 inches thick over sandy deposits.
Landscape position: depressions on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor:2.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

192A - Worcester sandy loam, 0 to 3 percent slopes

WORCESTER: Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position:stream terrace, outwash plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland if drained.
Not highly erodible.

193A - Minocqua muck, 0 to 2 percent slopes

MINOCQUA: Parent material: silty and loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: drainageway on outwash plain, depression on outwash plain, drainageway on stream terrace,depression on stream terrace.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitationsfor cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland if drained.
Not highly erodible.

2002 - Udorthents, earthen dams

Not hydric.
Not prime farmland.

2015 - Pits

PITS: Landscape position: stream terrace, outwash plain, esker, moraine.

Land capability class: 8s (generally unsuited for cropland use).
Not prime farmland.

2025 - Pits and dumps, mine

Not hydric.
Not prime farmland.

2030 - Udorthents and Udipsamments, cut or fill

Multi-component mapunit.

UDORTHENTS: Not hydric.

Not prime farmland.

UDIPSAMMENTS: Not hydric.

Not prime farmland.

204C - Denomie silt loam, 6 to 15 percent slopes

DENOMIE: Parent material: silty and loamy till.

Landscape position: till plain.

Well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

204D - Denomie silt loam, 15 to 30 percent slopes

DENOMIE: Parent material: silty and loamy till.

Landscape position: till plain.

Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

204F - Denomie silt loam, 30 to 60 percent slopes

DENOMIE: Parent material: silty and loamy till.

Landscape position: till plain.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

215B - Pence sandy loam, 0 to 6 percent slopes

PENCE: Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscape position: stream terrace, outwash plain.

Somewhat excessively drained.
Not hydric.
Land capability class:3s (moderate limitations for cropland use).
T factor: 3.
Low available water capacity.
Not prime farmland.
Not highly erodible.

215C - Pence sandy loam, 6 to 15 percent slopes

PENCE: Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscape position: stream terrace, outwash plain.

Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
Low available water capacity.
Not prime farmland.
Highly erodible.

215D - Pence sandy loam, 15 to 30 percent slopes

PENCE: Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscapeposition: stream terrace, outwash plain.

Somewhat excessively drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 3.
Low available water capacity.
Not prime farmland.
Highly erodible.

217B - Karlin loamy fine sand, 0 to 6 percent slopes

KARLIN: Parent material: sandy outwash.

Landscape position: moraine, outwash plain, stream terrace.

Somewhat excessively drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

217C - Karlin loamy fine sand, 6 to 15 percent slopes

KARLIN: Parent material: sandy outwash.

Landscape position: moraine, outwash plain, stream terrace.

Somewhat excessively drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

226A - Allendale loamy fine sand, 0 to 3 percent slopes

ALLENDALE: Parent material: sandy sediments and underlying clayey lacustrine or till deposits.

Landscape position: ground moraine, lake plain, lake terrace, outwash plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 4.
Low available water capacity.
Not prime farmland.
Not highly erodible.

242B - Fence silt loam, lake terrace, 0 to 6 percent slopes

FENCE: Parent material: silty lacustrine deposits.

Landscape position: lake terrace.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 5.
High available water capacity.
Prime farmland.
Not highly erodible.

242C - Fence silt loam, lake terrace, 6 to 12 percent slopes

FENCE: Parent material: silty lacustrine deposits.

Landscape position: lake terrace.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 5.
High available water capacity.
Not prime farmland.
Potentially highly erodible.

3114A - Saprists, aquents, and aquepts, 0 to 1 percent slopes, ponded and flooded

SAPRISTS: 55 percent of the mapunit.

Parent material: herbaceous or woody organic material 16 to more than 51 inches thick over sandy or loamy deposits.

Landscape position: drainageway on lake plain, depression on moraine, drainageway on moraine, depression on outwash plain, drainageway on outwash plain.

Very poorly drained.
Hydric soil.
Land capability class: 8w (generally unsuited for cropland use).
T factor: 3.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

AQUENTS: 15 percent of the mapunit.

Parent material: sandy outwash, eolian, lacustrine, or till deposits.
Landscape position: drainageway on lake plain, depression on moraine, drainageway on moraine, depression on outwash plain, drainageway on outwash plain.
Very poorly drained.
Hydric soil.
Land capability class: 8w (generally unsuited for cropland use).
T factor: 5.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

AQUEPTS: 15 percent of the mapunit.

Parent material: loamy outwash, lacustrine,till, or alluvial deposits.
Landscape position: drainageway on lake plain, depression on moraine, drainageway on moraine, depression on outwash plain, drainageway on outwash plain.
Very poorly drained.
Hydric soil.
Land capability class: 8w (generally unsuited for cropland use).
T factor: 4.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

317D - Alcona fine sandy loam, lake terrace, 15 to 30 percent slopes

ALCONA: Parent material: stratified sandy and loamy lacustrine deposits.

Landscape position: lake terrace.

Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
Tfactor: 5.
High available water capacity.
Not prime farmland.
Highly erodible.

319A - Tonkey sandy loam, 0 to 2 percent slopes

TONKEY: Parent material: stratified loamy and sandy lacustrine deposits.

Landscape position: lake plain, outwash plain.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for croplanduse).
T factor: 5.
Moderate available water capacity.
Prime farmland if drained.
Not highly erodible.

3243A - Spear silt loam, lake terrace, 0 to 3 percent slopes

SPEAR: Parent material: silty lacustrine deposits.

Landscape position: lake terrace.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 5.
High available water capacity.
Prime farmland if drained.
Not highly erodible.

3276A - Au Gres loamy sand, 0 to 3 percent slopes

AU GRES: Parent material: sandy outwash.

Landscape position: lake plain, lake terrace, outwash plain, stream terrace.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

339B - Rousseau loamy fine sand, 0 to 6 percent slopes

ROUSSEAU: Parent material: sandy eolian deposits.

Landscape position: outwash plain, lake plain, dune.

Well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

339C - Rousseau loamy fine sand, 6 to 15 percent slopes

ROUSSEAU: Parent material: sandy eolian deposits.

Landscape position: outwash plain, lake plain, dune.

Well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

339D - Rousseau loamy fine sand, 15 to 30 percent slopes

ROUSSEAU: Parent material: sandy eolian deposits.

Landscape position: outwash plain, lake plain, dune.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Highly erodible.

3403A - Loxley, Beseman, and Dawson soils, 0 to 1 percent slopes

LOXLEY: 40 percent of the mapunit.

Parent material: herbaceous organic material more than 51 inches thick.

Landscape position: depression on moraine.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

BESEMAN: 30 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over loamy till.
Landscape position: depression on moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
Thismapunit has very high available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

DAWSON: 28 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over sandy or sandy and gravelly deposits.
Landscape position: depression on outwash plain, lake plain, moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

3512D - Menominee loamy sand, 15 to 30 percent slopes

MENOMINEE: Parent material: sandy material over loamy till or lacustrine sediments.

Landscape position:moraine, lake plain, outwash plain.

Well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

375A - Robago fine sandy loam, lake terrace, 0 to 3 percent slopes

ROBAGO: Parent material: lacustrine deposits.

Landscape position: lake terrace.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 5.
High available water capacity.
Prime farmland if drained.
Not highly erodible.

3826B - Allendale-Wakeley-Kinross complex, 0 to 6 percent slopes

ALLENDALE: 35 percent of the mapunit.

Parent material: sandy sediments and underlying clayey lacustrine or till deposits.

Landscape position: ground moraine, lake plain, laketerrace, outwash plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

WAKELEY: 30 percent of the mapunit.

Parent material: sandy outwash or lacustrine material underlain by clayey lacustrine deposits.
Landscape position: lake plain, outwash plain.
Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

KINROSS: 20 percent of the mapunit.

Parent material: sandy deposits.
Landscape position: lake plain, outwash plain, stream terrace.
Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

388B - Pelkie, occasionally flooded - Dechamps, frequently flooded complex, 0 to 4 percent slopes

Multi-component map unit.

PELKIE: 50 percent of the map unit

Parent material: sandy alluvium

Landscape position: flood plains

Moderately well drained
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

DECHAMPS: 30 percent of the mapunit.

Parent material: loamy alluvium.
Landscape position: flood plain.
Poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

3A - Totagatic-Bowstring-Ausable complex, 0 to 2 percent slopes, frequently flooded

TOTAGATIC: 40 percent of the map unit.

Parent material: sandy alluvium.

Landscape position: flood plain.

Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 5.
The mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

BOWSTRING: 30 percent of the map unit.

Parent material: highly decomposed organic material that is stratified with thin layers of sandy or loamy material.
Landscape position: flood plain.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
The mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

AUSABLE: 20 percent of the map unit.

Parent material: thin organic layers and sandy alluvium.
Landscape position: flood plain.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
The mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

405A - Lupton, Cathro, and Tawas soils, 0 to 1 percent slopes

LUPTON: 40 percent of the mapunit.

Parent material: herbaceous and woody organic material more than 51 inches thick.

Landscape position: depression on moraine, drainageway on moraine.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CATHRO: 30 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depression on moraine, drainageway on moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

TAWAS: 30 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over sandy deposits.
Landscape position: depression and drainageway on moraine, depression and drainageway on outwash plain.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

407A - Seelyeville and Markey soils, 0 to 1 percent slopes

SEELYEVILLE: 40 percent of the mapunit.

Parent material: herbaceous organic material more than 51 inches thick.

Landscape position: depression on lake plain, depression on outwashplain, drainageway on outwash plain.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 3.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

MARKEY: 30 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick overlying sandy deposits.
Landscape position: depression on lake plain, depressionon outwash plain, drainageway on outwash plain.
Very poorly drained.
Hydric soil.
Land capability class:7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
Ths mapunit has very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

408A - Lupton and Cathro soils, 0 to 1 percent slopes

LUPTON: 45 percent of the mapunit.

Parent material: herbaceous and woody organic material more than 51 inches thick.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 3.
Hydrologic group A/D (low runoff potential if drained; very high if undrained).
Very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

CATHRO: 40 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.
Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
Hydrologic group A/D (low runoff potential if drained; very high if undrained).
Very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

414A - Loxley and Beseman soils, 0 to 1 percent slopes

LOXLEY: 45 percent of the mapunit.

Parent material: sphagnum moss and herbaceous organic material more than 51 inches thick.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Occasional long duration ponding.
T factor: 3.
Very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

BESEMAN: 40 percent of the mapunit.

Parent material: sphagnum moss and herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Occasional long duration ponding.
T factor: 2.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

418A - Loxley and Dawson soils, 0 to 1 percent slopes

LOXLEY: 45 percent of the mapunit.

Parent material: sphagnum moss and herbaceous organic material more than 51 inches thick.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Occasional long duration ponding.
T factor: 3.
Very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

DAWSON: 40 percent of the mapunit.

Parent material: sphagnum moss and herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Occasional long durationponding.
T factor: 2.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

444B - Gichigami-Oronto complex, 0 to 6 percent slopes

GICHIGAMI: 65 percent of the mapunit.

Parent material: silty and loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric.
Land capability class: 3e (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

ORONTO: 25 percent of the mapunit.

Parent material: silty and loamy till.
Landscape position: till plains.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (few limitations for cropland use).
T factor:5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

445A - Kinross muck, 0 to 2 percent slopes

KINROSS: Parent material: sandy deposits.

Landscape position: depression and drainageway on lake plain, outwash plain, stream terrace.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

455A - Kinross-Au Gres-Markey complex, 0 to 3 percent slopes

KINROSS: 50 percent of the mapunit.

Parent material: sandy deposits.

Landscape position: depression and drainageway on lake plain, outwash plain, stream terrace.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

AU GRES: 25 percent of the mapunit.

Parent material: sandy outwash.
Landscapeposition: lake plain, lake terrace, outwash plain, stream terrace.
Somewhat poorly drained.
Not a hydricsoil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations forcropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not primefarmland.
The mapunit is not highly erodible.

MARKEY: 20 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over sandy or sandy and gravelly deposits.
Landscape position: depression on outwash plain, lake plain, moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

461A - Bowstring muck, 0 to 1 percent slopes, frequently flooded

BOWSTRING: Parent material: highly decomposed organic material that is stratified with thin layers of sandy or loamy material.

Landscape position: flood plain.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
Very high available water capacity.
Not prime farmland.
Not highly erodible.

475B - Rubicon-Sayner complex, 0 to 6 percent slopes

RUBICON: 50 percent of the mapunit.

Parent material: sandy deposits

Landscape position: outwash plain.

Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

SAYNER: 35 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plain.
Excessively drained.
Not hydric.
Land capabilityclass: 4s (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

475C - Rubicon-Sayner complex, 6 to 15 percent slopes

RUBICON: 50 percent of the mapunit.

Parent material: sandy deposits

Landscapeposition: outwash plain.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

SAYNER: 40 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plain.
Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

475D - Rubicon-Sayner complex, 15 to 30 percent slopes

RUBICON: 55 percent of the mapunit.

Parent material: sandy deposits

Landscape position: outwash plain.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not primefarmland.
The mapunit is highly erodible.

SAYNER: 40 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plains.
Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

500A - Croswell sand, 0 to 3 percent slopes

CROSWELL: Parent material: sandy deposits.

Landscape position: lake plain, lake terrace, outwash plain, stream terrace.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

5140A - Dawson, Greenwood, and Loxley soils, 0 to 1 percent slopes

DAWSON: 30 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over sandy or sandy and gravelly deposits.

Landscape position: depression on outwash plain, lake plain, moraine.

Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

GREENWOOD: 30 percent of the mapunit.

Parent material: herbaceous organic material more than 51 inches thick.
Landscape position: bogs on till plains.
Very poorly drained.
Hydricsoil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

LOXLEY: 30 percent of the mapunit.

Parent material: herbaceous organic material more than 51 inches thick.
Landscape position: depression on outwash plain, lake plain, moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5141A - Lupton-Pleine-Cathro complex, 0 to 1 percent slopes

LUPTON: 55 percent of the mapunit.

Parent material: herbaceous and woody organic material more than 51 inches thick.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 3.
This map unit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PLEINE: 15 percent of the mapunit.

Parent material: loamy till.
Landscape position: drainageway on till plains.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.
Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
This mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5146C - Amasa-Karlin complex, esker, 2 to 18 percent slopes

AMASA: 55 percent of the mapunit.

Parent material: loamy deposits underlain by stratified sandy and gravelly outwash.

Landscape position: eskers.

Well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

KARLIN: 40 percent of the mapunit.

Parent material: sandy outwash.
Landscapeposition: esker.
Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5146D - Amasa-Karlin complex, esker, 18 to 35 percent slopes

AMASA: 55 percent of the mapunit.

Parent material: loamy deposits underlain by stratified sandy and gravelly outwashdeposits.

Landscape position: eskers.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

KARLIN: 40 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: esker.
Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5146E - Amasa-Karlin complex, esker, 35 to 55 percent slopes

AMASA: 55 percent of the mapunit.

Parent material: loamy deposits underlain by stratified sandy and gravelly outwash deposits.

Landscape position: eskers.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

KARLIN: 40 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: esker.
Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

514B - Iosco loamy sand, 0 to 4 percent slopes

IOSCO: Parent material: sandy lacustrine or outwash deposits overlying loamy lacustrine or till deposits.

Landscape position: ground moraine, lake plain, outwash plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

515A - Manitowish sandy loam, 0 to 3 percent slopes

MANITOWISH: Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscapeposition: outwash plain, stream terrace.

Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 3.
Low available water capacity.
Not prime farmland.
Not highly erodible.

5170A - Minocqua-Pleine-Cathro complex, 0 to 2 percent slopes

MINOCQUA: 50 percent of the mapunit.

Parent material: silty and loamy deposits underlain by sandy and gravelly outwash.

Landscape position: stream terrace, outwash plain.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PLEINE: 35 percent of the mapunit.

Parent material: loamy till.
Landscapeposition: drainageway or depressions on till plains.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5171B - Tula-Wormet-Gogebic complex, 0 to 6 percent slopes, very stony

TULA: 60 percent of the map unit.

Parent material: loamy eolian material and underlying loamy till.

Landscape position: moraine.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
This map unit has moderate available water capacity.
The map unit is prime farmland, if drained.
The map unit is not highly erodible.

WORMET: 15 percent of the map unit.

Parent material: loamy alluvium or eolian deposits and underlying stratified sandy and gravelly outwash.
Landscape position: outwash plain, outwash terrace.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is prime farmland, if drained.
The mapunit is not highly erodible.

GOGEBIC: 15 percent of the mapunit.

Parent material: loamy deposits over loamy till.
Landscape position: moraine.
Moderately well drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland, if drained.
The mapunit is not highly erodible.

5172B - Gogebic, very stony-Pence, very stony-Cathro complex, 0 to 6 percent slopes

GOGEBIC: 60 percent of the mapunit.

Parent material: loamy eolian deposits over loamy and sandy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PENCE: 15 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraines.
Somewhat excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depression on moraine, drainagewayon moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not erodible.

5172C - Gogebic, very stony-Pence, very stony-Cathro complex, 0 to 18 percent slopes

GOGEBIC: 60 percent of the mapunit.

Parent material: loamy eolian deposits over loamy and sandy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PENCE: 15 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraines.
Somewhat excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 3.
This mapunit hasmoderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depression on moraine, drainageway on moraine.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

5172D - Gogebic, very stony-Pence, very stony-Cathro complex, 0 to 35 percent slopes

GOGEBIC: 60 percent of the mapunit.

Parent material: loamy eolian deposits over loamy and sandy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PENCE: 15 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraines.
Somewhat excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
Tfactor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
Themap unit is highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depressions on moraines, drainageway on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5173D - Gogebic-Pence complex, 18 to 35 percent slopes, very stony

GOGEBIC: 60 percent of the mapunit.

Parent material: loamy eolian deposits over loamy and sandy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PENCE: 30 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraine.
Somewhat excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5175C - Gogebic, very stony-Pence, very stony-Cathro complex, 0 to 18 percent slopes, rocky

GOGEBIC: 55 percent of the mapunit.

Parent material: loamy deposits over loamy till.

Landscape position: end moraines.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PENCE: 25 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: depressions and drainageways on moraines.
Somewhat excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 3.
This map unit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is potentially highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depressions on moraines, drainageways on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is notprime farmland.
The mapunit is potentially highly erodible.

5175D - Gogebic, very stony-Pence, very stony-Cathro complex, 0 to 35 percent slopes, rocky

GOGEBIC: 55 percent of the mapunit.

Parent material: loamy deposits over loamy till.

Landscape position: end moraines.

Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PENCE: 25 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: depressions and drainageways on moraines.
Somewhat excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for croplanduse).
T factor: 3.
This map unit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depressions on moraines, drainageways on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is notprime farmland.
The mapunit is highly erodible.

517B - Annalake fine sandy loam, lake terrace, 2 to 6 percent slopes

ANNALAKE: Parent material: loamy stratified lacustrine deposits.

Landscape position: lake terrace.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

517C - Annalake fine sandy loam, lake terrace, 6 to 15 percent slopes

ANNALAKE: Parent material: loamy stratified lacustrine deposits.

Landscape position: lake terrace.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

520A - Annriver silt loam, 0 to 2 percent slopes

ANNRIVER: Parent material: loess or silty lacustrine deposits overlying loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: depression on outwash plain, flat on outwash plain, depression on stream terrace, flat on stream terrace.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
Hydrologic group B/D (moderate runoff potential if drained; very high if undrained).
High available water capacity.
Farmland prime where drained.
Not highly erodible.

526A - Flink sand, 0 to 3 percent slopes

FLINK: Parent material: sandy outwash underlain by stratified silty, loamy, and sandy lacustrine deposits.

Landscape position: lake plain, lake terrace, outwash plain, outwash terrace.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

5285F - Rockland-Arnheim, frequently flooded complex, 0 to 70 percent slopes

ROCKLAND: 70 percent of the mapunit.

Parent material: loamy deposits.

Landscape position: river valleys.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 5.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ARNHEIM: 20 percent of the mapunit.

Parent material: loamy alluvial deposits.
Landscape position: floodplains.
Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 5.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5317B - Gogebic silt loam, 2 to 6 percent slopes, stony

GOGEBIC: Parent material: silty deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

5317C - Gogebic silt loam, 6 to 18 percent slopes, stony

GOGEBIC: Parent material: silty deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

5317D - Gogebic silt loam, 18 to 35 percent slopes, stony

GOGEBIC: Parent material: silty deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

5351B - Gogebic silt loam, 2 to 6 percent slopes, very stony, rocky

GOGEBIC: Parent material: silty deposits over loamy and sandy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

5351C - Gogebic silt loam, 6 to 18 percent slopes, very stony, rocky

GOGEBIC: Parent material: silty deposits over loamy and sandy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

5351D - Gogebic silt loam, 18 to 35 percent slopes, very stony, rocky

GOGEBIC: Parent material: silty deposits over loamy and sandy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

5353B - Tula-Gogebic complex, 0 to 6 percent slopes, stony

TULA: 45 percent of the mapunit.

Parent material: loamy deposits over loamy till.

Landscape position: till plains.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

GOGEBIC: 45 percent of the mapunit.

Parent material: silty deposits over loamy till.
Landscape position: till plains.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

5354B - Gogebic fine sandy loam, 1 to 6 percent slopes, very stony, rocky

GOGEBIC: Parent material: loamy deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland if drained.
Not highly erodible.

5369D - Dishno-Gogebic-Peshekee-Rock outcrop complex, 18 to 35 percent slopes, very stony

DISHNO: 35 percent of the mapunit.

Parent material: silty deposits over sandy and gravelly till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

GOGEBIC: 25 percent of the mapunit.

Parent material: silty deposits over loamy till.
Landscape position: moraine.
Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PESHEKEE: 20 percent of the mapunit.

Parent material: silty deposits over bedrock at less than 20 inches.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ROCK OUTCROP: 15 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
The mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5369E - Michigamme-Schweitzer-Peshekee-Rock outcrop complex, 35 to 55 percent slopes, very stony

MICHIGAMME: 35 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.

Landscape position: hills and ridges.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

SCHWEITZER: 25 percent of the mapunit.

Parent material: loamy deposits over cobbly and gravelly loamy and sandy till.
Landscape position: moraines.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderateavailable water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PESHEKEE: 25 percent of the mapunit.

Parent material: silty deposits over bedrock at less than 20 inches.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Landcapability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ROCK OUTCROP: 10 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
The mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5369F - Michigamme-Schweitzer-Peshekee-Rock outcrop complex, 55 to 75 percent slopes, very stony

MICHIGAMME: 35 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.

Landscape position: hills and ridges.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

SCHWEITZER: 25 percent of the mapunit.

Parent material: loamy deposits over cobbly and gravelly loamy and sandy till.
Landscape position: moraines.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PESHEKEE: 25 percent of the mapunit.

Parent material: silty deposits over bedrock at less than 20 inches.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Landcapability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ROCK OUTCROP: 10 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
The mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5373A - Cathro muck, drainageway, 0 to 1 percent slopes

CATHRO: Parent material: herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.

Landscape position: Drainageways in upland till areas.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
Very high available water capacity.
Not prime farmland.
Not highly erodible.

5374A - Bowstring-Arnheim complex, 0 to 1 percent slopes, frequently flooded

BOWSTRING: 50 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over gravelly sand deposits.

Landscape position: floodplains.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 5.
This map unit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

ARNHEIM: 40 percent of the mapunit.

Parent material: loamy alluvial deposits.
Landscape position: floodplains.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 5.
This map unit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

538B - Butternut silt loam, 1 to 6 percent slopes, very stony

BUTTERNUT: Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
High available water capacity.
Prime farmland.
Not highly erodible.

538C - Butternut silt loam, 6 to 15 percent slopes, very stony

BUTTERNUT: Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
High available water capacity.
Not prime farmland.
Highly erodible.

538D - Butternut silt loam, 15 to 30 percent slopes, very stony

BUTTERNUT: Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
High available water capacity.
Not prime farmland.
Highly erodible.

5425A - Foxpaw-Gay, stony complex, 0 to 2 percent slopes

Multi-component map unit.

FOXPAW: 45 percent of the mapunit.

Parent material: loamy tilll.

Landscape position: depressions and drainageways on moraines.

Poorly drained.
Hydric soil.
Land capability class: 6w (very severe limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

GAY: 40 percent of the mapunit.

Parent material: loamy tilll.
Landscape position: depressions and drainageways on moraines.
Poorly drained.
Hydric soil.
Land capability class: 6w (very severe limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5427B - Gogebic fine sandy loam, 2 to 6 percent slopes, stony

GOGEBIC: Parent material: loamy and silty deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

5427C - Gogebic fine sandy loam, 6 to 18 percent slopes, stony

GOGEBIC: Parent material: loamy and silty deposits over loamy till.

Landscape position: til plains.

Moderately well drained.
Not hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

5427D - Gogebic fine sandy loam, 18 to 35 percent slopes, stony

GOGEBIC: Parent material: loamy and silty deposits over loamy till.

Landscape position: till plains.

Moderately well drained.
Not hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

5429B - Gogebic-Peshekee complex, 2 to 6 percent slopes, very stony, very rocky

GOGEBIC: 70 percent of the mapunit.

Parent material: silty deposits over loamy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PESHEKEE: 20 percent of the mapunit.

Parent material: silty deposits less than 20 inches thick over bedrock.
Landscape position: hills, ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5429C - Gogebic-Peshekee complex, 6 to 18 percent slopes, very stony, very rocky

GOGEBIC: 70 percent of the mapunit.

Parent material: silty deposits over loamy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PESHEKEE: 20 percent of the mapunit.

Parent material: silty deposits less than 20 inches thick over bedrock.
Landscape position: hills, ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

5429D - Gogebic-Peshekee complex, 18 to 35 percent slopes, very stony, very rocky

GOGEBIC: 70 percent of the mapunit.

Parent material: silty deposits over loamy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PESHEKEE: 20 percent of the mapunit.

Parent material: silty deposits less than 20 inches thick over bedrock.
Landscape position: hills, ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5432C - Gogebic-Michigamme-Rock outcrop complex, 6 to 18 percent slopes, very stony

GOGEBIC: 70 percent of the mapunit.

Parent material: silty deposits over loamy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

MICHIGAMME: 15 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

ROCK OUTCROP: 10 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
This mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

5432D - Gogebic-Michigamme-Rock outcrop complex, 6 to 35 percent slopes, very stony

GOGEBIC: 70 percent of the mapunit.

Parent material: silty deposits over loamy till.

Landscape position: moraines.

Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

MICHIGAMME: 15 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ROCK OUTCROP: 10 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
This mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5432E - Schweitzer-Michigamme-Rock outcrop complex, very stony, 18 to 55 percent slopes

SCHWEITZER: 45 percent of the mapunit.

Parent material: loamy deposits over cobbly and gravelly loamy and sandy till.

Landscape position: moraines.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

MICHIGAMME: 35 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.
Landscape position: hills and ridges.
Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderateavailable water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ROCK OUTCROP: 10 percent of the mapunit.

Land capability class: 7s (generally unsuited for cropland use).
This mapunit has moderate available water capacity.
Not hydric.
The mapunit is not prime farmland.
The mapunit is highly erodible.

549A - Pickford-Oronto complex, 0 to 3 percent slopes

ORONTO: 60 percent of the mapunit.

Parent material: silty and loamy till.

Landscape position: till plains.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (few limitations for cropland use).
T factor:5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PICKFORD: 30 percent of the mapunit.

Parent material: clayey till or lacustrine deposits
Landscape position: depression on lake plain, depression on moraine.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5504A - Moquah-Arnheim complex, 0 to 3 percent slopes, frequently flooded

MOQUAH: 60 percent of the mapunit.

Parent material: loamy alluvium.

Landscape position: flood plain.

Moderately well drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2s (moderate limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

ARNHEIM: 30 percent of the mapunit.

Parent material: loamy alluvial deposits.
Landscape position: floodplains.
Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 5.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5509A - Cathro-Minocqua complex, drainageway, 0 to 1 percent slopes

CATHRO: 45 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick over loamy or silty deposits.

Very poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

MINOCQUA: 40 percent of the mapunit.

Parent material: silty and loamy deposits underlain by sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5519B - Pence-Gogebic complex, 2 to 6 percent slopes, stony

PENCE: 60 percent of the mapunit.

Parent material: loamy deposits less than 20 inches thick over stratified sandy and gravelly outwash.

Landscape position: end moraines.

Somewhat excessively drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
Tfactor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

GOGEBIC: 30 percent of the mapunit.

Parent material: loamy deposits over loamy till.
Landscape position: end moraines.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5519C - Pence-Gogebic complex, 6 to 18 percent slopes, stony

PENCE: 60 percent of the mapunit.

Parent material: loamy deposits less than 20 inches thick over stratified sandy and gravelly outwash.

Landscape position: end moraines.

Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

GOGEBIC:30 percent of the mapunit.

Parent material: loamy deposits over loamy till.
Landscape position: end moraines.
Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5519D - Pence-Gogebic complex, 18 to 35 percent slopes, stony

PENCE: 60 percent of the mapunit.

Parent material: loamy deposits less than 20 inches thick over stratified sandy and gravelly outwash.

Landscape position: end moraines.

Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
Tfactor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

GOGEBIC: 30 percent of the mapunit.

Parent material: loamy deposits over loamy till.
Landscape position: end moraines.
Moderately well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5527B - Wakefield loam, 1 to 6 percent slopes, stony

WAKEFIELD: Parent material: loamy eolian deposits and underlying loamy till.

Landscape position: till plain.

Moderately well drained.
Not hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2e (few limitations for cropland use).
T factor: 3.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

5527C - Wakefield loam, 6 to 18 percent slopes, stony

WAKEFIELD: Parent material: loamy eolian deposits and underlying loamy till.

Landscape position: tillplain.

Moderately well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
Moderate available water capacity.
Not prime farmland.
Potentially highly erodible.

5527D - Wakefield loam, 18 to 35 percent slopes, stony

WAKEFIELD: Parent material: loamy eolian deposits and underlying loamy till.

Landscape position: tillplain.

Moderately well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 3.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

5541B - Michigamme-Channing complex, 0 to 6 percent slopes, very stony, rocky

MICHIGAMME: 65 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.

Landscape position: hills and ridges.

Well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CHANNING: 25 percent of the mapunit.

Parent material: loamy deposits 20-35 inches thick underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

5541C - Michigamme-Channing complex, 0 to 18 percent slopes, very stony, rocky

MICHIGAMME: 65 percent of the mapunit.

Parent material: silty deposits, 20 to 40 inches thick, over bedrock.

Landscape position: hills and ridges.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

CHANNING: 25 percent of the mapunit.

Parent material: loamy deposits 20-35 inches thick underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace,outwash plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

5543B - Chabeneau-Annalake complex, 0 to 6 percent slopes

CHABENEAU: 50 percent of the unit.

Parent material: silty deposits 20-35 inches thick underlain by stratified sandy and gravelly outwash.

Landscape position: stream terrace, outwash plain.

Well drained.
Not hydric.
Land capability class: 2s (few limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is prime farmland.
The mapunit is not highly erodible.

ANNALAKE: 40 percent of the mapunit.

Parent material: silty to sandy stratified lacustrine deposits.
Landscape position: lake plains.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland.
The mapunit is not highly erodible.

555A - Fordum silt loam, 0 to 2 percent slopes, frequently flooded

FORDUM: Parent material: silty or loamy alluvium underlain by sandy and gravelly alluvium.

Landscape position: flood plain.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

5684B - Amasa cobbly fine sandy loam, 1 to 6 percent slopes

AMASA: Parent material: loamy deposits underlain by stratified sandy and gravelly outwash.

Landscape position: beach ridges and eskers.

Well drained.
Not hydric.
Land capability class: 2e (few limitationsfor cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland.
The map unit is not highly erodible.

5684C - Amasa cobbly fine sandy loam, 6 to 18 percent slopes

AMASA: Parent material: loamy deposits underlain by stratified sandy and gravelly outwash.

Landscape position: outwash plains, kames, eskers.

Well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

5684D - Amasa cobbly fine sandy loam, 18 to 35 percent slopes

AMASA: Parent material: loamy deposits underlain by stratified sandy and gravelly outwash.

Landscape position: outwash plains, kames, eskers.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5689B - Chabeneau-Channing-Gogebic complex, 0 to 6 percent slopes, stony

CHABENEAU: 35 percent of the mapunit.

Parent material: silty deposits 20-35 inches thick underlain by stratified sandy and gravelly outwash.

Landscape position: stream terrace,outwash plain.

Well drained.
Not hydric.
Land capability class: 2s (few limitations for cropland use).
T factor: 5.
This mapunit has high available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

CHANNING: 30 percent of the mapunit.

Parent material: silty and loamy deposits 20-35 inches thick underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

GOGEBIC: 25 percent od the mapunit.

Parent material: silty deposits over loamy and sandy till.
Landscape position: till plains.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is prime farmlandif drained.
The mapunit is not highly erodible.

571B - Pelissier gravelly sandy loam, 2 to 6 percent slopes

PELISSIER: Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: esker, moraine.

Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 2.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

571C - Pelissier gravelly sandy loam, 6 to 15 percent slopes

PELISSIER: Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: esker, moraine.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations fo rcropland use).
T factor: 2.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

571E - Pelissier gravelly sandy loam, 15 to 45 percent slopes

PELISSIER: Parent material: loamy deposits underlain by sandy and gravelly glacial outwash.

Landscape position: esker, moraine.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 2.
Low available water capacity.
Not prime farmland.
Highly erodible.

574B - Sayner loamy sand, 0 to 6 percent slopes

SAYNER: Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace, esker.

Excessivley drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

574C - Sayner loamy sand, 6 to 15 percent slopes

SAYNER: Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace, esker.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

574E - Sayner loamy sand, 15 to 45 percent slopes

SAYNER: Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace, esker.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Highly erodible.

582C - Padus-Pence-Keweenaw complex, 6 to 15 percent slopes, stony

PADUS: 40 percent of the mapunit.

Parent material: Parent material: loamy alluvium underlain by sandy and gravelly outwash

Landscape position: disintegration moraine.

Well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

PENCE: 25 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: disintegration moraine.
Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

KEWEENAW: 20 percent of the mapunit.

Parent material: sandy till.
Landscapeposition: disintegration moraine
Well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 5.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

582D - Padus-Pence-Keweenaw complex, 15 to 30 percent slopes, stony

PADUS: 40 percent of the mapunit.

Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: disintegration moraine.

Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

PENCE: 25 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: disintegration moraine.
Somewhat excessively drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

KEWEENAW: 20 percent of the mapunit.

Parent material: sandy till.
Landscape position: disintegration moraine Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 5.
The mapunit has moderate available water capacity.
The map unit is notprime farmland.
The map unit is highly erodible.

591A - Croswell-Chinwhisker complex, 0 to 3 percent slopes

CROSWELL: 50 percent of the map unit.

Parent material: sandy outwash.

Landscape position: outwash plain, stream terrace.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The map unit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CHINWHISKER: 35 percent of the map unit.

Parent material: sandy outwash.
Landscape position: outwash plain, stream terrace.
Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

594B - Vilas-Lindquist complex, 0 to 6 percent slopes

VILAS: 50 percent of mapunit.

Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Hydrologic group A (low runoff potential).
Low available water capacity.
Not prime farmland.
Not highly erodible.

LINDQUIST: 35 percent of mapunit.

Land position: outwash plain, outwashterrace.
Somewhat excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Hydrologic group A (low runoff potential).
Low available water capacity.
Not prime farmland.
Not highly erodible.

594C - Vilas-Lindquist complex, 6 to 15 percent slopes

VILAS: 50 percent of the map unit.

Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

LINDQUIST: 45 percent of the map unit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Somewhat excessively drained.
Not hydric.
Landcapability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

594D - Vilas-Lindquist complex, 15 to 30 percent slopes

VILAS: 50 percent of the map unit.

Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

LINDQUIST: 45 percent of the map unit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Somewhat excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

5A - Arnheim mucky silt loam, 0 to 1 percent slopes, frequently flooded

ARNHEIM: Parent material: loamy alluvium.

Landscape position: flood plain.

Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 5.
High available water capacity.
Not prime farmland.
Not highly erodible.

600A - Haplosaprists and Psammaquents, 0 to 2 percent slopes

HAPLOSAPRISTS: Very poorly drained.

Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
High availabl ewater capacity.
Not prime farmland.
Not highly erodible.

PSAMMAQUENTS: Very poorly drained.

Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration ponding.
T factor: 2.
Hydrologic group D (very high runoff potential).
Low available water capacity.
Not prime farmland.
Not highly erodible.

617C - Sedgwick-Rock outcrop complex, 2 to 15 percent slopes

SEDGWICK: 60 percent of the mapunit.

Parent material: loamy deposits and underlying clayey till.

Landscape position: till plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

ROCK OUTCROP: 25 percent of the mapunit.

Land capability class: 8s (generally unsuited for cropland use).
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

638B - Torch silt loam, 0 to 4 percent slopes, very stony

TORCH: Parent material: silty deposits over dense loamy sand till.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
High available water capacity.
The map unit Is prime farmland, if drained.
Not highly erodible.

639A - Neconish loamy fine sand, 0 to 3 percent slopes

NECONISH: Parent material: sandy outwash.

Landscape position: lake plain, outwash fan, outwash plain, stream terrace.

Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

644B - Shanagolden fine sandy loam, 2 to 6 percent slopes, very stony

SHANAGOLDEN: Parent material: loamy alluvium and in loamy till underlain by dense sandy or loamy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

644C - Shanagolden fine sandy loam, 6 to 15 percent slopes, very stony

SHANAGOLDEN: Parent material: loamy alluvium and in loamy till underlain by dense sandy or loamy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

644D - Shanagolden fine sandy loam, 15 to 30 percent slopes, very stony

SHANAGOLDEN: Parent material: loamy alluvium and in loamy till underlain by dense sandy or loamy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

670B - Keweenaw-Pence complex, 0 to 6 percent slopes, stony

KEWEENAW: 55 percent of the mapunit.

Parent material: sandy till.

Landscape position: disintegration moraine.

Well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: disintegration moraine.
Somewhat excessivelydrained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 3.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

670C - Keweenaw-Pence complex, 6 to 15 percent slopes, stony

KEWEENAW: 50 percent of the mapunit.

Parent material: sandy till.

Landscape position: disintegration moraine.

Well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: disintegration moraine.
Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

670E - Keweenaw-Pence complex, 15 to 45 percent slopes, stony

MMulti-component mapunit.

KEWEENAW: 50 percent of the mapunit.

Parent material: sandy till.

Landscape position: disintegration moraine.

Well drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: disintegration moraine.
Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 3.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

672B - Springstead loamy sand, 1 to 6 percent slopes, very stony

SPRINGSTEAD: Parent material: sandy deposits over dense sandy till.

Landscape position: moraines, drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Low available water capacity.
Not prime farmland.
Not highly erodible.

674B - Sultz sand, 0 to 6 percent slopes

SULTZ: Parent material: sandy outwash underlain by stratified loamy, or loamy and sandy alluvium or lacustrine deposits.

Landscape position: lake plain, lake terrace, outwash plain, outwash terrace.

Well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

674C - Sultz sand, 6 to 15 percent slopes

SULTZ: Parent material: sandy outwash underlain by stratified loamy, or loamy and sandy alluvium or lacustrine deposits.

Landscape position: lake plain, lake terrace, outwash plain, outwash terrace.

Well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

674E - Sultz sand, 15 to 45 percent slopes

SULTZ: Parent material: sandy outwash underlain by stratified loamy, or loamy and sandy alluvium or lacustrine deposits.

Landscape position: lake plain, lake terrace, outwash plain, outwash terrace.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Highly erodible.

675A - Robago fine sandy loam, 0 to 3 percent slopes

ROBAGO: Parent material: loamy lacustrine deposits.

Landscape position: lake plain.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 2w (few limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Prime farmland if drained.
Not highly erodible.

683A - Tipler sandy loam, 0 to 3 percent slopes

TIPLER: Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: stream terrace, outwash plain.

Moderately well drained.
Not hydric.
Land capability class: 2s (few limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

69B - Keweenaw-Sayner-Vilas complex, 2 to 6 percent slopes, stony

KEWEENAW: 45 percent of the map unit.

Parent material: sandy till.

Landscape position: moraine.

Well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

SAYNER: 30 percent of the map unit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plain, outwash terrace, esker.
Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

VILAS: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

69C - Keweenaw-Sayner-Vilas complex, 6 to 15 percent slopes, stony

KEWEENAW: 40 percent of the map unit.

Parent material: sandy till.

Landscape position: moraine.

Well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

SAYNER: 30 percent of the map unit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plain, outwash terrace, esker.
Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

VILAS: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

69E - Keweenaw-Sayner-Vilas complex, 15 to 45 percent slopes, stony

KEWEENAW: 40 percent of the map unit.

Parent material: sandy till.

Landscape position: moraine.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

SAYNER: 30 percent of the map unit.

Parent material: stratified sandy and gravelly outwash.
Landscape position: outwash plain, outwash terrace, esker.
Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

VILAS: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

6A - Moquah fine sandy loam, 0 to 3 percent slopes, frequently flooded

MOQUAH: Parent material: loamy alluvium.

Landscape position: flood plain.

Moderately well drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 5.
High available water capacity.
Not prime farmland.
Not highly erodible.

701A - Whisklake silt loam, 0 to 3 percent slopes

WHISKLAKE: Parent material: mostly loamy alluvium or eolian deposits underlain by sandy or gravelly outwash.

Landscape position: outwash plain, outwash terrace.

Somewhat poorly drained.
Not hydric, but this map unit commonly contains hydric inclusions.
Land capability class: 2w.
T factor: 4.
Hydrologic group C (high runoff potential).
High available water capacity.
Prime farmland where drained.
Not highly erodible.

705C - Cublake-Croswell-Ashwabay complex, 6 to 15 percent slopes

CUBLAKE: 35 percent of the mapunit.

Parent material: sandy outwash underlain by stratified silty, loamy, and sandy deposits.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CROSWELL: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: lake plain, lake terrace, outwash plain, stream terrace.
Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

ASHWABAY: 20 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey till or lacustrine deposits.
Landscape position: ground moraine, lake plain, outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

712B - Morganlake loamy sand, 0 to 6 percent slopes

CUBLAKE: 35 percent of the mapunit.

Parent material: sandy outwash underlain by stratified silty, loamy, and sandy deposits.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CROSWELL: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: lake plain, lake terrace, outwash plain, stream terrace.
Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

ASHWABAY: 20 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey till or lacustrine deposits.
Landscape position: ground moraine, lake plain,outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is not highly erodible.

712C - Morganlake loamy sand, 6 to 15 percent slopes

MORGANLAKE: Parent material: sandy outwash and underlying loamy till.

Landscape position: moraine.

Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

713B - Kellogg-Allendale-Ashwabay complex, 2 to 6 percent slopes

KELLOGG: 35 percent of the mapunit.

Parent material: sandy lacustrine or outwash sediments and underlying clayey lacustrine deposits.

Landscape position: lake plain.

Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is nothighly erodible.

ALLENDALE: 25 percent of the mapunit.

Parent material: sandy sediments andunderlying clayey lacustrine or till deposits.
Landscape position: ground moraine, lake plain, laketerrace, outwash plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

ASHWABAY: 20 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey glacial till or lacustrine deposits.
Landscape position: ground moraine, lake plain, outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

713C - Kellogg-Allendale-Ashwabay complex, 0 to 15 percent slopes

KELLOGG: 40 percent of the mapunit.

Parent material: sandy lacustrine or outwash sediments and underlying clayey lacustrine deposits.

Landscape position: lake plain.

Moderatelywell drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit ispotentially highly erodible.

ALLENDALE: 25 percent of the mapunit.

Parent material: sandy sediments and underlying clayey lacustrine or till deposits.
Landscape position: ground moraine, lake plain, lake terrace, outwash plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

ASHWABAY: 20 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey glacial till or lacustrine deposits.
Landscape position: ground moraine, lake plain, outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

730B - Glidden silt loam, 0 to 6 percent slopes, stony

GLIDDEN: Parent material: silty and loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscape position: outwash plains, outwash terraces, moraines, and eskers.

Well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

730C - Glidden silt loam, 6 to 15 percent slopes, stony

GLIDDEN: Parent material: silty and loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscape position: outwash plains, outwash terraces, moraines, and eskers.

Well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

730D - Glidden silt loam, 15 to 30 percent slopes, stony

GLIDDEN: Parent material: silty and loamy alluvium underlain by stratified sandy and gravelly outwash.

Landscape position: outwash plains, outwash terraces, moraines, and eskers.

Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Highly erodible.

738A - Cable silt loam, 0 to 2 percent slopes, very stony

CABLE: Parent material: silty deposits underlain by dense sandy till.

Landscape position: depression and/or drainageway on drumlins.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

744B - Peeksville fine sandy loam, 0 to 4 percent slopes, very stony

PEEKSVILLE: Parent material: loamy deposits underlain by dense sandy or loamy till.

Landscape position:drumlins.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 4.
Moderate available water capacity.
Prime farmland if drained.
Not highly erodible.

74B - Vilas loamy sand, 0 to 6 percent slopes

VILAS: Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

74C - Vilas loamy sand, 6 to 15 percent slopes

VILAS: Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Potentially highly erodible.

74D - Vilas loamy sand, 15 to 30 percent slopes

VILAS: Parent material: sandy outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Highly erodible.

755A - Moppet, occasionally flooded-Fordum, frequently flooded complex, 0 to 3 percent slopes

MOPPET: 45 percent of the mapunit.

Parent material: mostly loamy alluvium underlain by sandy or sandy and gravelly alluvium.

Landscape position: flood plain.

Moderately well drained.
Not hydric.
Land capability class: 3w (moderate limitations for cropland use).
Frequent brief duration flooding.
T factor: 4.
Hydrologic group B (moderate runoff potential).
Moderate available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

FORDUM: 40 percent of the mapunit.

Parent material: silty and loamy alluvium underlain by sandy or sandy and gravelly alluvium.
Landscape position: flood plain.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
Frequent long duration flooding.
Frequent long duration ponding.
T factor: 4.
Hydrologic group D (very high runoff potential).
Moderate available water capacity.
The mapunit is not prime farmland.
Not highly erodible.

756B - Superior-Sedgwick complex, 0 to 6 percent slopes

SUPERIOR: 50 percent of the mapunit.

Parent material: loamy alluvium and underlying clayey till.

Landscape position: till plain.

Moderately well drained.
Not hydric.
Land capability class: 3e (few limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

SEDGWICK: 30 percent of the mapunit.

Parent material: loamy alluvium andunderlying clayey till.
Landscape position: till plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

756C - Superior-Sedgwick complex, 6 to 15 percent slopes

SUPERIOR: 50 percent of the mapunit.

Parent material: loamy alluvium and underlying clayey till.

Landscape position: till plain.

Moderately well drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is potentially highly erodible.

SEDGWICK: 30 percent of the mapunit.

Parent material: loamy alluvium andunderlying clayey till.
Landscape position: till plain.
Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is potentially highly erodible.

770B - Shanagolden-Pence complex, 2 to 6 percent slopes, stony

SHANAGOLDEN: 55 percent of the mapunit.

Parent material: loamy deposits underlain by dense sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: less than 20 inches of loamy deposits underlain by stratified sandy and gravelly outwash.
Landscape position: drumlins.
Somewhat excessively drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

770C - Shanagolden-Pence complex, 6 to 15 percent slopes, stony

SHANAGOLDEN: 55 percent of the mapunit.

Parent material: loamy deposits underlain by dense sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: less than 20 inches of loamy deposits underlain by stratified sandy and gravelly outwash.
Landscape position: drumlins.
Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

770D - Shanagolden-Pence complex, 15 to 30 percent slopes, stony

SHANAGOLDEN: 55 percent of the mapunit.

Parent material: loamy deposits underlain by dense sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The map unit is highly erodible.

PENCE: 30 percent of the mapunit.

Parent material: less than 20 inches of loamy deposits underlain by stratified sandy and gravelly outwash.
Landscape position: drumlins.
Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
Tfactor: 3.
The mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

772B - Springstead sandy loam, 1 to 6 percent slopes, very stony

SPRINGSTEAD: Parent material: sandy deposits over dense sandy till.

Landscape position: moraines, drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 4.
Low available water capacity.
Not prime farmland.
Not highly erodible.

7C - Beaches, 2 to 12 percent slopes

BEACHES: Not prime farmland.

805E - Sultz-Ashwabay-Rubicon complex, 15 to 45 percent slopes

SULTZ: 35 percent of the mapunit.

Parent material: sandy outwash underlain by stratified loamy, or loamy and sandy alluvium or lacustrine deposits.

Landscape position: lake plain, lake terrace, outwash plain, outwash terrace.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ASHWABAY: 25 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey glacial till or lacustrine deposits.
Landscape position: ground moraine, lake plain, outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

RUBICON: 20 percent of the mapunit.

Parent material: outwash sands.
Landscapeposition: outwash plain.
Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor 5.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

813E - Manistee-Kellogg-Ashwabay complex, 15 to 45 percent slopes

MANISTEE: 40 percent of the mapunit.

Parent material: sandy lacustrine or outwash sediments underlain by clayey lacustrine deposits.

Landscape position: lake plain.

Well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

KELLOGG: 30 percent of the mapunit.

Parent material: sandy lacustrine or outwash sediments and underlying clayey lacustrine deposits.
Landscape position: lake plain.
Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

ASHWABAY: 20 percent of the mapunit.

Parent material: sandy outwash or beach deposits underlain by clayey glacial till or lacustrine deposits.
Landscape position: ground moraine, lake plain, outwash plain.
Moderately well drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 4.
The mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

815A - Wormet sandy loam, 0 to 3 percent slopes

WORMET: Parent material: loamy alluvium or eolian deposits and underlying stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace.

Somewhat poorly drained.
Not a hydric soil, but commonly contains hydric soil inclusions.
Land capability class: 3w (moderate limitations for cropland use).
T factor: 3.
Low available water capacity.
Not prime farmland.
Not highly erodible.

830A - Spiderlake silt loam, 0 to 3 percent slopes, stony

SPIDERLAKE Parent material: silty and loamy alluvium underlain by stratified sandy outwash.

Landscape position: stream terrace, outwash plain.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
High available water capacity.
Prime farmland.
Not highly erodible.

834B - Butternut-Spiderlake complex, 1 to 6 percent slopes, stony

BUTTERNUT: 50 percent of the mapunit.

Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is prime farmland.
The mapunit is not highly erodible.

SPIDERLAKE: 35 percent of the mapunit.

Parent material: 20-40 inches of silty and loamy alluvium underlain by stratified sandy outwash.
Landscape position: moraines.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is prime farmland.
The mapunit is not highly erodible.

835C - Butternut-Glidden complex, 6 to 15 percent slopes, stony

BUTTERNUT: 60 percent of the mapunit.

Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

GLIDDEN: 30 percent of the mapunit.

Parent material: silty and loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraines.
Well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

835D - Butternut-Glidden complex, 15 to 30 percent slopes, stony

BUTTERNUT: 60 percent of the mapunit.

Parent material: 20-40 inches of silty deposits over loamy and sandy till.

Landscape position: drumlins.

Moderately well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

GLIDDEN: 30 percent of the mapunit.

Parent material: silty and loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: moraines.
Well drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

852C - Pence-Padus complex, 6 to 15 percent slopes, stony

PENCE: 55 percent of the mapunit.

Parent material: mostly loamy alluvium or eolian deposits underlain by sandy and gravelly glacial outwash.

Landscape position: disintegration moraine.

Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations forcropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PADUS: 35 percent of the mapunit.

Parent material: mostly loamy alluvial deposits underlain by stratified sandy outwash.
Landscape position: disintegration moraine.
Well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

852D - Pence-Padus complex, 15 to 30 percent slopes, stony

PENCE: 55 percent of the mapunit.

Parent material: mostly loamy alluvium oreolian deposits underlain by sandy and gravelly glacial outwash.

Landscape position: disintegration moraine.

Somewhat excessively drained.
Not hydric.
Land capability class: 7e (severe limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PADUS: 35 percent of the mapunit.

Parent material: mostly loamy alluvial deposits underlain by stratified sandy outwash.
Landscape position: disintegration moraine.
Well drained.
Not hydric.
Land capability class: 6e (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

884C - Keweenaw, stony-Vilas-Cathro complex, 0 to 15 percent slopes

KEWEENAW: 40 percent of the mapunit.

Parent material: sandy till.

Landscape position: moraine.

Well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

VILAS: 30 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depression on moraines, drainageway on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The map unit is potentially highly erodible.

885B - Springstead, stony-Annalake-Cathro complex, 0 to 6 percent slopes

SPRINGSTEAD: 50 percent of the mapunit.

Parent material: sandy deposits over dense sandy till.

Landscape position: moraines, drumlins.

Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

ANNALAKE: 30 percent of the mapunit.

Parent material: loamy stratified lacustrine deposits.
Landscape position: lake plains, moraines, outwash terraces.
Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

CATHRO: 15 percent of the mapunit.

Parent material: herbaceous organic material 16 to 51 inches thick underlain by loamy deposits.
Landscape position: depression on moraines, drainageway on moraines.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 2.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

9013A - Tipler-Manitowish complex, 0 to 3 percent slopes

TIPLER: 40 percent of the map unit.

Parent material: loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace.

The map unit is potentially highly erodible.
Moderately well drained.
Not hydric.
Land capability class: 2s (few limitations for cropland use).
T factor: 4.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

MANITOWISH: 35 percent of the map unit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: outwash plain, stream terrace.
Moderately well drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
T factor: 3.
This mapunit has moderate available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

9050A - Fordum, Totagatic, and Bowstring soils, 0 to 1 percent slopes, frequently flooded

FORDUM: 40 percent of the mapunit.

Parent material: silty or loamy alluvium underlain by sandy and gravelly alluvium.

Landscape position: flood plain.

Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 4.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

TOTAGATIC: 40 percent of the map unit.

Parent material: sandy alluvium.
Landscape position: flood plain.
Poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 5.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

BOWSTRING: 20 percent of the map unit.

Parent material: highly decomposed organic material that is stratified with thin layers of sandy or loamy material.
Landscape position: flood plain.
Very poorly drained.
Hydric soil.
Land capability class: 7w (severe limitations for cropland use).
T factor: 3.
This mapunit has high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

9051A - Minocqua, Cable, and Pleine soils, 0 to 2 percent slopes, very stony

MINOCQUA: 40 percent of the mapunit.

Parent material: silty and loamy alluvium underlain by sandy and gravelly outwash.

Landscape position: drainageway on outwash plain, depression on outwash plain, drainageway on stream terrace, depression on stream terrace.

Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 4.
This map unit has moderate available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

CABLE: 30 percent of the mapunit.

Parent material: loess or silty alluvium and loamy alluvium underlain by dense sandy till.
Landscape position: depression and drainageway on moraine.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor:4.
This mapunit has moderate available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

PLEINE: 20 percent of the mapunit.

Parent material: loamy till.
Landscape position: depression and drainageway on moraine.
Poorly drained.
Hydric soil.
Land capability class: 6w (severe limitations for cropland use).
T factor: 5.
This mapunit has moderate available water capacity.
The mapunit is prime farmland if drained.
The mapunit is not highly erodible.

905A - Cublake loamy sand, 0 to 3 percent slopes

CUBLAKE: Parent material: sandy outwash underlain by stratified silty, loamy, and sandy lacustrine deposits.

Landscape position: lake plain.

Moderately well drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
Hydrologic group B (moderate runoff potential).
Moderate available water capacity.
Not prime farmland.
Not highly erodible.

9155A - Haplosaprists, Peats, and Mucks, 0 to 1 percent slopes

HAPLOSAPRISTS: Parent material: herbaceous or woody organic material 16 to more than 51 inches thick over sandy or loamy deposits.

Landscape position: drainageway on lake plain, depression on moraine, drainageway on moraine, depression on outwash plain, drainageway on outwash plain.

Very poorly drained.
Hydric soil.
Land capability class: 7w (generally unsuited for cropland use).
T factor: 3.
The mapunit has very high available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

917B - Annalake fine sandy loam, 2 to 6 percent slopes

ANNALAKE: Parent material: loamy stratified lacustrine deposits.

Moderately well drained.
Not hydric.
Land capability class: 2e (few limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Prime farmland.
Not highly erodible.

917C - Annalake fine sandy loam, 6 to 15 percent slopes

ANNALAKE: Parent material: loamy stratified lacustrine deposits.

Moderately well drained.
Not hydric.
Land capability class: 3e (moderate limitations for cropland use).
T factor: 5.
Moderate available water capacity.
Not prime farmland.
The map unit is potentially highly erodible.

926A - Flink loamy sand, 0 to 3 percent slopes

FLINK: Parent material: sandy outwash deposits underlain by stratified silty, loamy, and sandy lacustrine deposits.

Landscape position: lake plain.

Somewhat poorly drained.
Not hydric, but may contain hydric inclusions.
Land capability class: 4w (moderate limitations for cropland use).
T factor: 5.
Low available water capacity.
Not prime farmland.
Not highly erodible.

974B - Sayner-Pence-Vilas complex, 0 to 6 percent slopes

SAYNER: 40 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

PENCE: 35 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Somewhat excessively drained.
Not hydric.
Land capability class: 3s (moderate limitations for cropland use).
Tfactor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

VILAS: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 4s (moderate limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is not highly erodible.

974C - Sayner-Pence-Vilas complex, 6 to 15 percent slopes

SAYNER: 40 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 6s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

PENCE: 35 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Somewhat excessively drained.
Not hydric.
Land capability class: 4e (moderate limitations for cropland use).
T factor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.
Multi-component map unit.

VILAS: 20 percent of the mapunit.

Parent material: sandy outwash.
Landscapeposition: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 6s(severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is potentially highly erodible.

974D - Sayner-Pence-Vilas complex, 15 to 30 percent slopes

SAYNER: 40 percent of the mapunit.

Parent material: stratified sandy and gravelly outwash.

Landscape position: outwash plain, outwash terrace.

Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

PENCE: 35 percent of the mapunit.

Parent material: loamy alluvium underlain by stratified sandy and gravelly outwash.
Landscape position: stream terrace, outwash plain.
Somewhat excessively drained.
Not hydric.
Land capability class: 6e (severe limitations for cropland use).
T factor: 3.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.

VILAS: 25 percent of the mapunit.

Parent material: sandy outwash.
Landscape position: outwash plain, outwash terrace.
Excessively drained.
Not hydric.
Land capability class: 7s (severe limitations for cropland use).
T factor: 5.
This mapunit has low available water capacity.
The mapunit is not prime farmland.
The mapunit is highly erodible.