Outagamie County Soil Descriptions

Outagamie County Soil Descriptions

Click on the soil code to view its description

AdA	Ax
Bc	BnA	BoA	BrB	BrC2	BrD2	BtA	BtB
Ca	CcB	CcC2	CcD2	Cm	CnB
De
ElB	ElC2
Fu
Gp	GrA	GrB
HeB	HnB	HnC2	HrB	HrC2	HrD2	HrE	HsB	HsC2	HtB
KaA	Ke	KhB	KhC2	KhD2	KkE3	KlB	KoB	KoC2
Ln	Lo
McA	MeB	MeC2	MfB	Mk	MsB	MsC2	MtA	MuA
NaB	NfA	NfB	NsA	NsB
OhB	OhC2	OhD2	OlB
Pe	Pf	Po
Ra	Rd	RoB
SeC	SeD	ShA	SkA	SnB	SoA	Su	SyA	SzA
Uf	Uo
WaA	Wb	WnA	WnB	WnC2
ZtA

AdA - Allendale loamy fine sand, 0 to 3 percent slopes

Somewhat poorly drained sandy over clayey soil.
Low available water capacity.
This soil is not hydric,but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Farmland of state wide importance.
The land capability subclass is 3W.

Ax - Angelica silt loam

Poorly and very poorly drained loamy soil.
Frequently ponded.
High available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 2W where the wetness limitation is removed.

Bc - Bellevue silt loam

Moderately well drained loamy soil.
Frequently flooded.
High available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where protected from flooding.
The land capability subclass is 3W.
The capability class is 1 where the flooding limitation is removed.

BnA - Bonduel silt loam, 0 to 3 percent slopes

Somewhat poorly drained loamy soil.
Hard bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

BoA - Borth silt loam, 0 to 3 percent slopes

Well drained clayey over sandy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

BrB - Boyer loamy sand, 2 to 6 percent slopes

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 3S.

BrC2 - Boyer loamy sand, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

BrD2 - Boyer loamy sand, 12 to 20 percent slopes, eroded

Well drained loamy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 4E.

BtA - Briggsville silt loam, 0 to 2 percent slopes

Well drained clayey soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

BtB - Briggsville silt loam, 2 to 6 percent slopes

Well drained clayey soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

Ca - Carbondale muck

Very poorly drained organic soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

CcB - Casco loam, 2 to 6 percent slopes

Well drained loamy over sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

CcC2 - Casco loam, 6 to 12 percent slopes, eroded

Well drained loamy over sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 4E.

CcD2 - Casco loam, 12 to 20 percent slopes, eroded

Well drained loamy over sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

Cm - Cathro muck

Very poorly drained organic over loamy soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

CnB - Channahon silt loam, 2 to 6 percent slopes

Well and moderately well drained loamy soil.
Hard bedrock is at a depth of 10 to 20 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 1 ton/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

De - Deford loamy fine sand

Poorly and very poorly drained sandy soil.
Frequently ponded.
Low available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 5W.
The subclass is 3W where the wetness limitation is removed.

ElB - Eleva fine sandy loam, 2 to 6 percent slopes

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 3S.

ElC2 - Eleva fine sandy loam, 6 to 15 percent slopes, eroded

Well drained loamy soil.
Soft bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

Fu - Fluvaquents

Poorly and very poorly drained soil.
Frequently flooded.
Moderate available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness and flooding limitations are removed.

Gp - Gravel pits

Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 8S.

GrA - Grays silt loam, 0 to 2 percent slopes

Moderately well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

GrB - Grays silt loam, 2 to 6 percent slopes

Moderately well drained silty soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

HeB - Hebron loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

HnB - Hortonville fine sandy loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

HnC2 - Hortonville fine sandy loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

HrB - Hortonville silt loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

HrC2 - Hortonville silt loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

HrD2 - Hortonville silt loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

HrE - Hortonville silt loam, 20 to 30 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 6E.

HsB - Hortonville silt loam, limestone substratum, 2 to 6 percent slopes

Well drained loamy soil.
Hard bedrock is at a depth of 40 to 60 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentiall yhighly erodible.
Prime farmland.
The land capability subclass is 2E.

HsC2 - Hortonville silt loam, limestone substratum, 6 to 12 percent slopes, eroded

Well drained loamy soil.
Hard bedrock is at a depth of 40 to 60 inches.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

HtB - Hortonville-Symco silt loams, 2 to 6 percent slopes

High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

KaA - Kaukauna silty clay loam, 0 to 3 percent slopes

Moderately well drained clayey over loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 2S.

Ke - Keowns silt loam

Poorly drained loamy soil.
Frequently ponded.
Moderate available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

KhB - Kewaunee silt loam, 2 to 6 percent slopes

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

KhC2 - Kewaunee silt loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

KhD2 - Kewaunee silt loam, 12 to 20 percent slopes, eroded

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

KkE3 - Kewaunee soils, 20 to 45 percent slopes, severely eroded

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 7E.

KlB - Kewaunee-Manawa complex, 2 to 6 percent slopes

Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

KoB - Kolberg silt loam, 1 to 6 percent slopes

Well drained clayey soil.
Hard bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

KoC2 - Kolberg silt loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Hard bedrock is at a depth of 20 to 40 inches.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

Ln - Limestone quarries

Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 8S.

Lo - Lobo peat

Very poorly drained organic soil.
Frequently ponded.
Very high available water capacity.
This soil ishydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 7W.
The subclass is 4W where the wetness limitation is removed.

McA - Manawa silty clay loam, 1 to 3 percent slopes

Somewhat poorly drained clayey soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2E.

MeB - Manistee loamy fine sand, 2 to 6 percent slopes

Well drained sandy over clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Farmland of state wide importance.
The land capability subclass is 3S.

MeC2 - Manistee loamy fine sand, 6 to 12 percent slopes, eroded

Well drained sandy over clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

MfB - Manistee fine sandy loam, 2 to 6 percent slopes

Well drained sandy over clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 3 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3S.

Mk - Markey muck

Very poorly drained organic over sandy soil.
Frequently ponded.
High available water capacity.
This soilis hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

MsB - Menominee loamy fine sand, loamy substratum, 2 to 6 percent slopes

Well drained sandy over loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

MsC2 - Menominee loamy fine sand, loamy substratum, 6 to 12 percent slopes, eroded

Well drained sandy over loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
Theland capability subclass is 4E.

MtA - Mosel silt loam, 0 to 3 percent slopes

Somewhat poorly drained loamy soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

MuA - Mundelein silt loam, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

NaB - Namur silt loam, 1 to 6 percent slopes

Well drained loamy soil.
Hard bedrock is at a depth of 5 to 12 inches.
Very low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 1 ton/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 6S.

NfA - Nichols very fine sandy loam, 0 to 2 percent slopes

Moderately well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

NfB - Nichols very fine sandy loam, 2 to 6 percent slopes

Moderately well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

NsA - Nichols very fine sandy loam, clayey substratum, 0 to 2 percent slopes

Moderately well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability class is 1.

NsB - Nichols very fine sandy loam, clayey substratum, 2 to 6 percent slopes

Moderately well drained loamy soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

OhB - Onaway loam, 2 to 6 percent slopes

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

OhC2 - Onaway loam, 6 to 12 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Farmland of state wide importance.
The land capability subclass is 3E.

OhD2 - Onaway loam, 12 to 20 percent slopes, eroded

Well drained loamy soil.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Highly erodible.
Not prime farmland.
The land capability subclass is 4E.

OlB - Onaway-Solona complex, 2 to 6 percent slopes

High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 2E.

Pe - Pella silt loam

Poorly drained silty soil.
Frequently ponded.
High available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 2W where the wetness limitation is removed.

Pf - Poy silty clay loam

Poorly drained clayey over sandy soil.
Frequently ponded.
Low available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 6W.
The subclass is 2W where the wetness limitation is removed.

Po - Poygan silty clay loam

Poorly drained clayey soil.
Frequently ponded.
Moderate available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 6W.
The subclass is 2W where the wetness limitation is removed.

Ra - Rock outcrop

Not hydric.
Not highly erodible.
Not prime farmland.
The land capability subclass is 8S.

Rd - Rondeau muck

Very poorly drained organic soil.
Frequently ponded.
Frequently flooded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 1 ton/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness and flooding limitations are removed.

RoB - Rousseau loamy fine sand, 2 to 6 percent slopes

Well drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 3S.

SeC - Shawano fine sand, rolling

Excessively drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 6S.
The subclass is 4E where irrigated.

SeD - Shawano fine sand, hilly

Excessively drained sandy soil.
Low available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 7S.

ShA - Shiocton silt loam, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
Moderate available water capacity.
This soil is not hydric, but themap unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

SkA - Shiocton silt loam, clayey substratum, 0 to 3 percent slopes

Somewhat poorly drained silty soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

SnB - Shiocton-Nichols complex, 2 to 6 percent slopes

Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
High available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

SoA - Solona silt loam, 1 to 3 percent slopes

Somewhat poorly drained loamy soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

Su - Suamico muck

Very poorly drained organic over clayey soil.
Frequently ponded.
Very high available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 2 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 6W.
The subclass is 3W where the wetness limitation is removed.

SyA - Symco silt loam, 1 to 3 percent slopes

Somewhat poorly drained loamy soil.
High available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.

SzA - Symco variant, 0 to 3 percent slopes

Somewhat poorly drained loamy over sandy soil.
Occasionally flooded.
Low available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosionrate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 3W.
The subclass is 2W where the flooding limitation is removed.

Uf - Udifluvents

Well and moderately well drained soil.
Frequently flooded.
High available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Farmland of state wide importance.
The land capability subclass is 3W.
The subclass is 2W where the flooding limitation is removed.

Uo - Udorthents

Somewhat excessively and well drained soil.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Not prime farmland.
The land capability subclass is 7E.
Not assigned a hydric soil class.
Not highly erodible.
Not prime farmland.
Not assigned a land capability class.

WaA - Wainola loamy fine sand, 0 to 3 percent slopes

Somewhat poorly drained sandy soil.
Low available water capacity.
This soil is not hydric, but the mapunit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Farmland of state wide importance.
The land capability subclass is 3W.

Wb - Will silt loam

Poorly drained loamy over sandy soil.
Frequently ponded.
Low available water capacity.
This soil is hydric.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 5W.
The subclass is 2W where the wetness limitation is removed.

WnA - Winneconne silty clay loam, 0 to 2 percent slopes

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 5 tons/acre/year.
Not highly erodible.
Prime farmland.
The land capability subclass is 3S.

WnB - Winneconne silty clay loam, 2 to 6 percent slopes

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Prime farmland.
The land capability subclass is 3E.

WnC2 - Winneconne silty clay loam, 6 to 12 percent slopes, eroded

Well drained clayey soil.
Moderate available water capacity.
This soil is not hydric.
The maximum allowable erosion rate is 5 tons/acre/year.
Potentially highly erodible.
Not prime farmland.
The land capability subclass is 4E.

ZtA - Zittau silty clay loam, 0 to 3 percent slopes

Somewhat poorly drained clayey over sandy soil.
Moderate available water capacity.
This soil is not hydric, but the map unit commonly contains hydric inclusions.
The maximum allowable erosion rate is 4 tons/acre/year.
Not highly erodible.
Prime farmland where drained.
The land capability subclass is 2W.